GFE安全帽紫外線預處理箱

一、安全帽紫外線預處理箱儀器介紹

專業用于安全帽的紫外線照射預處理，廣泛應用于特種勞動防護用品監督檢驗站、建筑科學研究院、建筑工程檢測站。

二、安全帽紫外線預處理箱詳細參數

●紫外線照射源：450W高壓短脈沖氙氣燈

●降溫方式：風冷式，有效保障儀器內部溫度低于60℃

●采用高精度溫度傳感器，測試溫度精度0.2％

●照射時間定時范圍： 0~999小時，測試時間精度：1min                        

●預處理安全帽數量： 1—14頂

●優質冷軋板電控箱體和優質不銹鋼材質實驗箱體

●具有氙燈熄滅自動停止計時功能

●保護系統：設備內部配備保護系統，如果發現設備故障，會自動切斷全部實驗艙內電源，有效保障設備與實驗室的安全

三、安全帽紫外線預處理箱符合標準

GB/T 2812－2006《安全帽測試方法》、GB/T 2811－2007《安全帽》

GFE helmet uv pretreatment box

I. introduction of uv pretreatment box for safety helmet

It is widely used in the pretreatment of uv irradiation for hard hats, which is widely used in the supervision and inspection station of special labor protection products, building science research institute and construction engineering inspection station.

2. Detailed parameters of the uv pretreatment box of the helmet

Uv irradiation source: 450W high pressure short pulse xenon lamp

Low cooling method: air-cooled, effective guarantee instrument internal temperature falls below 60 ℃

The high precision temperature sensor is used to test the temperature accuracy of 0.2%

Time range: 0~999 hours, accuracy of test time: 1min

Number of pretreatment safety caps: 1-14 top

High quality cold rolling plate electric control box and high quality stainless steel material experiment box body

A xenon lamp extinguishes the timing function automatically

Protection system: the equipment is equipped with protection system. If the equipment fails, it will automatically cut off all the power supply in the laboratory and ensure the safety of the equipment and laboratory

3. The uv pretreatment box of the helmet conforms to the standard

GB/T 2812-2006 "safety helmet test method", GB/T 2811-2007 "hard hat"